Once you have joined a wireless network, the wireless status indicator in your menubar should show one or more solid bars, indicating that you are connected and the signal strength of the connection. If not, contact the person responsible for the wireless network and ask them - we can't help you with this! Hopefully you know the password to supply. Unless the network you choose is open and unprotected, you will then have to supply a password to join it. Multiple network names may appear if there are other wireless networks operating in the immediate vicinity. Next you will need to click on the "Network Name" popup menu and choose the wireless network that you'd like to join. You should then select "Wi-Fi" in the network connection services list and make sure that Wi-Fi is ON. Enter your administrator credentials to allow you to make changes. Click on the "Network" panel then click the padlock icon at the lower left. If you need to configure a Wi-Fi network connection, however, open the "System Preferences" app from the Apple Menu on your Mac. You most likely have already joined a wireless network for the sake of accessing the internet, in which case no further steps are necessary and you may proceed to the PREPARING FOR SHARING section of this guide. This involves a simple connection to your AirPort base station or other Wi-Fi access point (commonly known as a hot spot) to join the network. One of the most common networking methods for Macs utilizes wireless ethernet. The other device will be accessed using using built-in file sharing. If you are trying to synchronize or backup between a Mac and a file server, or NAS device, you still only need to install ChronoSync on the Mac. ChronoAgent synchronizes files faster, encrypts file transfers, and provides full administrative access to the Mac it is installed on. If you want to realize the maximum potential of your connection, however, consider installing ChronoAgent on the other Mac. The other Mac can be accessed using built-in file sharing. If you are trying to synchronize or backup between two Macs, you only need to install ChronoSync on one of them. You can then configure ChronoSync to automatically connect to and run a synchronization or backup when the remote device is available on the network. Once you have connected, you can access drives and folders on the remote device as long as they have been made accessible. This guide explains the various methods used to connect a ChronoSync Mac to another Mac, a file server or a Network Attached Storage ( NAS) device on a local area network ( LAN).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |